MEMO User Manual ENG 2024

To print new labels, you have two main options: 

• Option 1: you have more than 1 sticker to print  
• Option 2 : you have only 1 sticker to print

Option 1 : To print more than 1 sticker

• Open the application EQUIPMENT in General Data module

From this page you have the possibility to:

• Select all the equipment you want to print: 

1. Possibility 1: Print all labels according to the filters used: don’t check the boxes, just use the filters, and follow step 3
2. Possibility 2: Print labels of a selection of equipment: you must check the boxes associated with each equipment and then follow the steps below. 

Tips : you can check all box of the page by clicking on this box

• Click on , A pop-up window will display: 

• Select the label size you want to print out by clicking inside the Quick Reporting list. Depending on your choice of the label format, you will get the following printing formats:

• Choose the type of format to export these labels – You need to choose a PDF document to fit the standards MEMO stickers

• Click LAUNCH

• Once the format is selected – click the «Launch» icon to generate the report 

Note : Depending on the internet browser you are using, you will need to allow pop-ups to be able to print the data.

• Try to print on normal paper first, to see if the labels are well aligned with the paper (by transparency). 

If it isn’t working, follow the next step. If it is working, put the sticker paper in the printer and print again.

• Download the report and print it  with abode acrobat following specifics settings. Some settings need to be modified according to the model of the printer, the brand of the computer and the size of the stickers. Ask your MEMO focal point for instructions about the print settings. 

Pay attention to how to put the paper in the printer (depending on the model: front or back, put the top or bottom of the page). These settings work for the most of printers. 

• Stick the sticker on the EQ

Point of vigilance: 
- Don’t stick on a removable part (cover, battery cover, antenna, battery for radios, etc.)
- Clean and dry the surface  before sticking
- Define the MSF number before printing the sticker

Option 2 : Print 1 sticker 

• in GENERAL DATA module, open the application EQUIPMENT
• Open the page of the equipment you want to print

• Click on , A pop-up window will display, and select your type of sticker

• you need to define the position (row, column) of the label in the generated document. 

In this example with Label sheet large, , 10 stickers are already used, you want to print in the yellow position (Column 2, line 4) 

• Choice PDF and click LAUNCH
• Follow the instruction of the option 1